Saturday 8 October 2011

AK Interactive Streaking Grime and Filters

As I mentioned in my last post, I had used a number of products and techniques which were new to me on my Ultramarines Contemptor Dreadnought. Among these were the AK Interactive Streaking Grime and Rust Streak products.

The Streaking products are all enamel based paints, but much more diluted than regular enamels. This means that, once applied, they can be worked further with a brush moistened with white spirit. Using a flat brush and up and down brushing motions, you can quickly and easily create the kinds of weather markings typically seen on vehicle armour plates as a result of rain and rust - as can be seen in the following pictures:

As you can see, this example was produced rather quickly and roughly to demonstrate the products and the technique. On an actual model, with a little more care, the results look more like this:

The main strength of these products is the ability to continue to tweak and alter the effect even after it has dried by going back in with a brush that has been moistened with white spirit. By doing this you can knock the effect back if you have done too much, or make streaks longer etc.

If you are looking to pick some up, in the UK I would recommend Scale Model Shop. As I was running around in trying to get my entry finished in the run up to Games Day, I made a couple of orders for necessary items and they arrived within 2 days of ordering - top service!

Monday 3 October 2011

Golden Demon UK 2011 - 40K Vehicle Bronze

Back from a week off after Games Day and have finally got around to taking some decent pictures of my main entry for Golden Demon 2011 which took Bronze in the Warhammer 40k Vehicle Category.

This is the first vehicle (let alone large model) I have painted in around 10+ years so it was a much bigger challenge than I had at first considered - particularly given that I had 2 weeks from clean up and assembly to finished and mounted on it's plinth (using rare earth magnets)!

Next year I hope to do a few more entries well in advance so that I don't feel so rushed and under pressure. Having left it until the last minute, there are a few things I know I could do better/more on which may have helped improve the final placing, but I am definitely still very pleased to have taken Bronze for the second year running (and my second year entering) given the quality of competition.

Click the images for a bigger view.

Links to CoolMiniOrNot listing for those who like to vote :)

I tried a lot of new things on this model (a risky strategy on a competition entry when under time pressure) and was pretty pleased with the results. I don't have the time or energy for a full write up on them right now, but expect to see posts on using enamels, AK Interactive Streaking Grime, making icicles and making your own decals in the not too distant future.